Touch-Up Set Suitable for Ford, 6DYE Royal Grey Met Clearcoat X6 X 5ZET X0

Description

Touch-Up Set Suitable for Ford, 6DYE Royal Grey Met Clearcoat X6 X 5ZET X0
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Paint pen set suitable
for Ford
(base coat + clear coat)
+ 2 paint swabs
Shade number: 6DYE or X6 or X or 5ZET or X0
Shade Name: Royal Gray Metallic ( Sea Gray )
Our touch-up sticks are a good solution for the simple, quick and inexpensive removal of small paint damage.
Characteristics:
· High light and temperature resistance
· Very economical with good leveling properties
· Highest filling power and opacity
· easy processing
· Fast drying because all colors are acrylic-based
Scope of delivery:
1 paint stick 4 ml suitable for
Ford
, Colour: as indicated above, with screw cap, integrated brush and mixing ball.
1 clear coat touch-up stick 4ml, with screw cap and integrated brush.
2 paint swabs (the colors of the paint swabs may vary)
If you cannot find the color code on your vehicle, send us a message. We're here to help.
Shipment:
Shipping takes place as a maxi letter with Deutsche Post.
A notice:
All colors are freshly bottled after ordering and we check their quality and consistency.
Color deviations of the touch-up pen compared to your vehicle are possible due to the age of the vehicle and the weather.
We always mix the standard tone, so there can also be color deviations because there are several nuances for most colors.
Be sure to check the color tone before processing.
Remark:
Be sure to protect from frost!
Repairing the damaged car paint using our touch-up pen cannot replace a professional repair in a car paint shop!
No liability for improper use.
Rules for the VOC regulation
Since January 1st, 2007, the "VOC regulation" has also applied to car paint dealers.
(2004/42/EC or 1999/13/EC). We have to make sure that customers
with us, for example, a paint that does not meet the VOC specification
also only used for applications covered by the VOC regulation
be mentioned, such as vintage car restoration or das
filling spray cans.
Products that comply with the VOC regulation will continue to be sold without restrictions.
Products that do not meet the standards of the VOC regulation may only be used for the following applications.
restoration
of vintage cars filling aerosol spray cans painting of vehicles
Bundeswehr, civil protection, fire brigade and those responsible for maintenance
the forces responsible for the order - painting of vehicles in the
public service are used exclusively in the city area
Industrial painting (e.g. plastic parts without vehicle reference)
The distributor is responsible for ensuring that only VOC-compliant
Products for vehicle painting are sold and more
also ensure that the restricted products are only for the
mentioned applications are used.
I hereby confirm that I am familiar with the legal situation of the ChemVOCFarbV and that I have been sufficiently informed about this by Touch-Up Express Bühner. I confirm that I do not comply with the respective VOC limit values
corresponding products that I obtain from Touch-Up Pen Express Bühner,
used exclusively for the exceptional cases provided for by law
will. The responsibility for the intended use of the at
Touch-up pen Express Bühner purchased item is hereby transferred to me.
Touch-up stick Express Bühner
Bernd Buhner
Mönchenhöfner Dorfstrasse 58
06917 Jessen / OT Mönchenhöfe
Application information:
Thoroughly clean the area, if rust is visible remove it carefully with sandpaper (please make sure that the surrounding paintwork is not damaged).
For bare plastic parts, we recommend using a plastic adhesive primer, which is applied very thinly to the bare plastic and approx. Leave for 10 to 15 minutes. You can find the plastic adhesive primer in our shop if required.
Shake the 1K primer/rust protection paint stick (if necessary) vigorously and apply very carefully with the brush and allow to dry (approx. 10 to 15 minutes should usually be enough ).
Then shake the base coat touch-up pen vigorously and carefully apply a thin layer in several layers, leaving it to dry again and again (approx. 10 to 20 mins. ), repeat the whole thing until the base coat has covered, then again for approx. Leave to dry for 15-20 minutes.
Then shake the clear coat touch-up stick vigorously and apply carefully, then let it dry properly. The clear coat is usually more viscous than the base coat, so it should be used more sparingly.
-
Additional Information:
Attention: No statement of sales tax, since small entrepreneurs according to § 19 para. 1 VAT Act.
Checkout
we will combine all items that you buy from us within 3 hours into one order
please only complete your order after purchasing the last item
When paying by bank transfer, please always enter your Ebay name in the intended use so that we can allocate the incoming payment
reviews
We evaluate immediately after receiving your evaluation
If you are not satisfied with our products, please give us a short feedback. We always strive to keep our customers satisfied and will try to solve any problem so that no negative reviews have to be given.
link to
Online dispute resolution platform of the EU
target="_blank"
danger sign
hazard warnings
H225 Highly flammable liquid and vapour.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness and dizziness.
H373 May cause damage to organs through prolonged or repeated exposure.
safety instructions
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of the reach of children.
P103 Read label before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353
In case of contact with skin
(or hair): Take off immediately all contaminated clothing.
Rinse skin with water/shower.
P305+P351+P338
In case of contact with the eyes
: Rinse cautiously with water for several minutes. If possible, remove contact lenses. Continue rinsing.
P312 If you feel unwell
Poison Information Center/Doctor
call up.
P337+P313 If eye irritation persists: Get medical advice/attention.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
KEEP OUT OF THE HANDS OF CHILDREN!
I hereby confirm that I am familiar with the legal situation of the ChemVOCFarbV and that I have been sufficiently informed about this by Touch-Up Express Bühner. I confirm that I do not comply with the respective VOC limit values For bare plastic parts, we recommend using a plastic adhesive primer, which is applied very thinly to the bare plastic and approx. Leave for 10 to 15 minutes. You can find the plastic adhesive primer in our shop if required. Then shake the base coat touch-up pen vigorously and carefully apply a thin layer in several layers, leaving it to dry again and again (approx. 10 to 20 mins. ), repeat the whole thing until the base coat has covered, then again for approx. Leave to dry for 15-20 minutes. If you are not satisfied with our products, please give us a short fee
Hersteller
Lackstift Express
EAN
Nicht zutreffend
Farbe
Grau
Volumen
2 x 4ml
Lackart
Basislack + Klarlack
Fahrzeugmarke
Ford
Herstellernummer
LE006
Anwendungsbereich
Lackieren & Ausbessern
Herstellungsland und -region
Deutschland
Produktart
Lackstift